wdh-site
wdh-site
Home wdh-site News wdh-site
News classification
  1. company news
  2. Industry News
  3. Products Tips
  • How To Choose Gas Stoves?

    How To Choose The Right Gas Stove For Your Home

    How to Choose the Right Gas Stove for Your Home

     

    A gas stove is a great way to cook your food. It is fast, efficient, and can be used to cook a variety of different foods.

     

    There are many different types and models of gas stoves on the market, so it is important to do your research before you purchase one. Here are a few things to consider when you are choosing a gas stove for your home.

     

    1. Size

     

    The first thing you need to consider is the size of the stove. You need to make sure that the stove will fit in the space that you have available in your kitchen. If you do not have a lot of space, then you may want to consider a smaller model.

     

    2. Fuel Type

     

    There are two main types of fuel that can be used in a gas stove: natural gas and propane. Natural gas is cheaper than propane, but it is not always available in all areas. Propane is more expensive than natural gas, but it is easier to find in most areas.

     

    5 Reasons Why Gas Stoves Are Better Than Electric

     

    1. Gas stoves are cheaper to operate than electric stoves.

     

    2. Gas stoves cook food more evenly than electric stoves.

     

    3. Gas stoves allow you to control the heat more precisely than electric stoves.

     

    4. Gas stoves heat up faster than electric stoves.

     

    5. You can use a gas stove to cook during a power outage, but you can't use an electric stove.

     

    What models does the Gas Stove have?

     

    The Gas Stove has three different models. The first model is the one that is the most basic. It has four burners and a oven. The second model is the same as the first model but it also has a griddle. The third model is the same as the second model but it also has a side burner.

     

    Which kitchens are Gas Stove suitable for?

     

    - Any kitchen with a gas line running to it

     

    - Kitchens with an oven that is also gas-powered

     

    - Outdoor kitchens

     

    Notes on installing Gas Stove

     

    1. Make sure the area around the stove is clear and clean before starting to install it.

     

    2. Read the instructions carefully before starting to install the stove.

     

    3. Make sure you have all the required tools and parts before starting to install the stove.

     

    4. Follow the instructions step by step to properly install the stove.

     

    5. Do a final check to make sure everything is installed correctly before using the stove

    wdh-site View More
  • How To Choose Gas Stoves?

    How To Choose Gas Stoves?

     

    When Did Gas Stoves Appear?

     

    The first gas stoves appeared in the early 19th century. The earliest known model was invented by Scottish engineer James Sharp in 1826. His stove was called the "coal gas ring cooker."

    It wasn't until the late 19th century that gas stoves became widely used in households. In 1885, about 5 percent of American households had a gas stove. By 1925, that number had risen to 50 percent.

    Today, gas stoves are still widely used in many parts of the world, especially in Asia and Europe.

     

    What Are The Advantages Of Gas Stoves?

     

    The main advantage of a gas stove over an electric one is that it is much easier to control the heat when cooking. With an electric stove, it can be very easy to overcook or burn food because the heat is not as easily adjustable.

    Another advantage of gas stoves is that they tend to be less expensive than electric ones. They also tend to heat up more quickly.

    There are a number of advantages to using gas stoves:

    - They're cheaper to operate than electric stoves.
    - They heat up quickly and evenly, so food cooks more evenly.
    - They're easier to control than electric stoves, so you can more easily adjust the heat while cooking.
    - Gas stoves produce less heat than electric stoves, so your kitchen will stay cooler in hot weather.

     

    What Type Of Gas Stoves?

     

    There are three main types of gas stoves: natural gas, propane, and butane. Each type has its own set of pros and cons.

    Natural gas is the most common type of gas stove. It is cheaper than propane and butane, and it burns cleaner than both of them. However, natural gas is not as portable as propane or butane.

    Propane is more expensive than natural gas, but it is more portable. Propane also burns cleaner than butane.

    Butane is the least expensive type of gas stove, but it is also the least efficient. Butane stoves are not as popular as natural gas or propane stoves.

     

    If you're in the market for a new gas stove, you may be wondering what type is best. Here are a few things to consider when making your decision:

    -Size: How big do you need your stove to be? Make sure to measure your kitchen space before making a purchase.

    -Features: What features are important to you? Do you want a stove with a self-cleaning oven? Double ovens? A griddle?

    -Budget: How much are you willing to spend on a new stove? Prices can range from $500 to $2000 or more.

    -Fuel type: Gas stoves come in both natural gas and propane models. Be sure to choose the right one for your home.

     

    How To Install A Gas Stove?

     

    If you're installing a gas stove for the first time, there are a few things you need to know. Here are the basics of how to install a gas stove.

     1. Read the manufacturer's instructions carefully. This is very important, as each stove is different and you need to know exactly what to do.

     2. Make sure you have all the necessary tools and materials before you start. This includes a wrench, pipe thread sealant, and teflon tape.

     3. Shut off the gas supply to your home before beginning the installation process. This is a safety precaution that should never be ignored.

     4. Connect the gas stove to the gas line using flexible tubing. Make sure all connections are tight and secure, using pipe thread sealant and teflon tape as needed.

     

    What To Pay Attention To When Using A Gas Stove?

     

    When using a gas stove, it is important to be aware of the potential hazards. Gas stoves can produce carbon monoxide, a colorless and odorless gas that can be deadly.

     It is important to make sure that your gas stove is properly ventilated. The exhaust fan should be turned on when cooking, and the area around the stove should be well-ventilated.

     Additionally, you should never leave a gas stove unattended while it is on. Be sure to turn off the burner when you are finished cooking.

     

    1. Check for leaks

     Before using your gas stove, it's important to check for leaks. To do this, apply a soapy water solution to the connections between the gas line and the stove. Then turn on the gas and look for bubbles. If you see any, that means there's a leak.

     

    2. Make sure the area is well ventilated

     When using your gas stove, it's important to make sure the area is well ventilated. This will help prevent carbon monoxide buildup.

     

    3. Don't leave food unattended

    It's important to pay attention to your food while it's cooking. Don't leave it unattended, as this can lead to fires.

     

     

    Where To Buy  Gas Stoves

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

     

    wdh-site View More
  • How to Choose the Right Range Hood?

    How to Choose the Right Range Hood?

    Why Use a Range Hood ?

     

    A range hood is a type of ventilation system that is installed above the stove in order to remove smoke, fumes, and odors from the kitchen.

    A range hood is one of the most important appliances in your kitchen. It does more than just remove smoke, odors and heat — it also helps to keep your kitchen clean.

    There are many benefits of using a range hood, such as:

    -Reducing indoor air pollution

    -Improving the efficiency of your stove

    -Preventing grease and smoke stains on walls and ceilings

    -Keeping your kitchen cooler in the summer months

    -Extending the life of your stove

     

    Types of Range Hoods

     

    There are three common types of range hoods: ducted, ductless, and downdraft.

    Ducted range hoods are the most effective at removing smoke and odors from the kitchen. They are also the most expensive and require professional installation.

    Ductless range hoods filter the air but do not exhaust it outside. They are less expensive than ducted range hoods but are not as effective at removing smoke and odors.

    Downdraft range hoods draw air down into the range hood and then filter it. They are less expensive than other types of range hoods but are not as effective at removing smoke and odors.

     

    Factors to Consider When Choosing a Range Hood

     

    There are several factors that you need to consider when choosing a range hood. Here are some of the most important ones:

    Size: The size of your range hood is very important. You need to make sure that it is the right size for your stove.

    Style: The style of your range hood is also important. You need to make sure that it matches the rest of your kitchen.

    Type: There are two main types of range hoods, ducted and recirculating. Ducted range hoods vent the air outside, while recirculating range hoods filter the air and send it back into the kitchen.

     

    Precautions When Using the Range Hood

     

    When using the range hood, there are a few precautions you should take in order to avoid any accidents.

    - Always turn on the range hood before cooking.

    -Turn off the range hood when finished cooking.

    - Keep the area around the range hood clear of combustible materials, such as paper towels and curtains.

    - Do not leave children unattended in the kitchen while cooking.

     

    Range Hood Cleaning and Maintenance

     

    But like all appliances, your range hood needs to be properly cleaned and maintained in order to function at its best. Here are some tips for range hood cleaning and maintenance:

    1.Clean the hood regularly. Depending on how often you use your stove, you should clean your hood at least once a month. If you have a lot of people in your household or if you cook frequently, you may need to clean it more often. Use a mild soap and warm water to clean the exterior of the hood, and use a damp cloth to wipe down the inside surface of the vents.

    2.Remove Grease Buildup. Over time, grease can build up on your range hood’s filters and vents. This can cause problems with air flow and make it harder for the range hood to do its job. To remove grease buildup, soak the filters in hot soapy water for 20 minutes, then scrub with a nylon brush. For stubborn buildup, you may need to use a degre.

     

    Common Problems and Solutions of Range Hoods

     

    A range hood is one of the most important appliances in your kitchen. It removes smoke, grease, and odors from the air, keeping your kitchen clean and comfortable.

    However, range hoods can be a source of problems. Some common range hood problems include:

    - Grease build-up on the filters

    - Loud operation

    - Vents that don't open or close properly

    - Lights that don't work

    - Smoke and odors still present in the air

     

    Fortunately, most of these problems have relatively simple solutions. Read on for tips on how to fix common range hood issues.

     1. Not enough air flow.

    This is the number one problem for range hoods. If your range hood cannot move enough air, it’s not going to do its job properly. The solution is to make sure you have the right size range hood for your stove.

     2. Poorly designed duct work.

    If your duct work is poorly designed, it can restrict the airflow of your range hood. The solution is to have a professional designer or contractor help you design and install your duct work.

     3. Grease and dirt build-up on range hood filters and fan blades.

    This can happen over time, and it reduces the efficiency of your range hood. The solution is to clean or replace your filters and fan blades regularly.

     

    Where to Buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • What are the Classifications of Gas Water Heaters

    What are the Classifications of Gas Water Heaters

    What are the Classifications of Gas Water Heaters

     

    Flue

     

    The flue-type water heater is an improvement of the direct-exhaust water heater. An anti-backward exhaust hood and a smoke exhaust system are added to the upper part of the original direct-exhaust structure. Its working principle is: cold water enters the cold water inlet of the water heater, enters the heat exchanger after passing through the filter and the water-air linkage assembly, and the heated hot water is output from the hot water outlet. The gas enters the gas inlet of the water heater, and flows through the filter, gas regulator, solenoid valve, gas volume control valve, gas valve, gas collector, and gas nozzle in the water-gas linkage assembly to enter the burner.

     

    Forced exhaust

     

    The main reason for the safety accidents of gas water heaters is indoor air pollution. To avoid the poisoning accident of CO in the flue gas, the fundamental measure is to discharge the flue gas outdoors to keep the indoor air clean and hygienic. Forced exhaust water heaters use forced exhaust or forced blast to exhaust combustion flue gas outdoors. The flue type water heater uses the natural exhaust method to discharge the flue gas to the outdoors. Compared with the safety of use, it is better than the straight exhaust type water heater. However, flue-type water heaters have high requirements for flue installation conditions, which are difficult to meet in general urban apartment-style houses. The mandatory water heater has more perfect safety performance and is relatively easy to install. There are two typical structures of strong exhaust water heaters: exhaust type and blast type.

     

    Forced supply and exhaust type (ie balanced type)

     

    The safety performance of the strong discharge water heater has been greatly improved compared with the flue type water heater. However, there are still some weaknesses. First, the air required for combustion is still taken indoors. Second, the air volume of the water heater cannot be adjusted with the change of the heat load, so that the air volume under low load is too large, and the thermal efficiency of the use and maintenance of the water heater is low. The minimum load is also significantly higher.

     

    Condensing

     

    The significance of developing high-efficiency and energy-saving civil burning appliances has been raised from simply saving expenditures for users to realizing the needs of sustainable development of the national economy. The main difference between the condensing gas water heater and the ordinary gas water heater is the difference in the heat exchanger. In order to fully absorb the heat of the high-temperature flue gas and facilitate the collection of condensed water, the condensing gas water heater generally adopts the secondary heat exchange method. According to the structural characteristics of the whole machine, a condensing heat exchanger can be installed above it, a sensible heat exchanger can be installed below it, and a condensed water collector can be installed between the two.

     

     

     

     

    Gas water heater cleaning and maintenance

     

    1. To use the gas water heater for cleaning and maintenance, you must read the product instruction manual, and use the water heater according to the usage instructions and the nameplate instructions, and perform preliminary and simple water heater maintenance, cleaning and maintenance, etc.;

     

    2. The room must be well ventilated;

     

    3. When the gas water heater has air leakage, water leakage, the flame does not go out after the water is stopped, and the combustion conditions are not good, it should stop using it, and promptly notify the gas management department or the manufacturer to repair it, and it is strictly forbidden to disassemble and repair it without permission;

     

    4. Regularly invite professionals or manufacturers designated by the gas management department to clean and maintain the gas water heater, and make timely overhauls to keep the gas water heater clean and in good working condition; 5. Do not use expired water heater cleaning and maintenance agents, according to national standards It is stipulated that from the date of sale of gas water heaters, the service life for cleaning and maintenance of liquefied petroleum gas and natural gas water heaters is 15 years, and the service life for cleaning and maintenance of artificial gas water heaters is 10 years.

     

    Will gas water heaters grow in popularity?

     

    Yes, gas water heaters will continue to gain popularity. This is because they are more efficient and less expensive to run than electric water heaters. Many homeowners choose natural gas over electricity because of their lower operating costs. Also, gas water heaters tend to last longer than electric models.

     

    Due to the pandemic, people are spending more time at home, which has led to an increase in the use of natural gas water heaters. Additionally, many homeowners are looking for ways to save on energy bills.

     

    There are several factors that will affect the popularity of gas water heaters in the future. Natural gas prices are a major factor. If natural gas prices rise, the popularity of gas water heaters may decline. The efficiency of a gas water heater is another important factor. If electric water heaters become more efficient, they will be more popular than gas water heaters.

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

     

    wdh-site View More
  • What consumers should pay attention to when buying gas stoves

    What consumers should pay attention to when buying gas stoves

    What consumers should pay attention to when buying gas stoves

     

    With more and more products in the market, consumers should pay attention to the following points when purchasing gas stoves:

     

    1. Different forms of gas cookers should be selected in combination with the overall design and use requirements of the kitchen, such as desktop, embedded, ultra-thin, and oven or sterilized gas cookers.

     

    2. Pay attention to whether the purchased products have a sales permit label. Only the products with this label are approved by the Beijing Municipal Gas Management Office to meet the local gas use requirements. cause danger.

     

    3. When possible, choose a gas cooker with a safety protection device, which is commonly referred to as a safety flameout device, which will automatically cut off the gas path when the gas flame is accidentally extinguished, thereby preventing gas from overflowing. effect.

     

    4. Although the cooker is a low-tech product, it has particularly high requirements for safety performance. Therefore, it is necessary to purchase products from professional manufacturers with a large production scale, which can ensure that the self-production rate of spare parts reaches more than 99%.

     

    5. The most critical component in the ignition system of the desktop cooker is the igniter. The igniter with strong ignition and crisp sound can ensure the success rate and service life of the cooker ignition.

     

    6. The most critical components in the combustion system of the desktop cooker are the burner head and the fire distributor. The stove head and the forged copper fire distributor after SQP anti-rust treatment can ensure the thermal efficiency of combustion and a long service life.

     

    7. The flameout protection device of the built-in cooker is the most advanced ion induction type. It can sense the presence and disappearance of heat within 0.1 seconds, and play the role of automatically cutting off the gas when the flame is accidentally turned off.

     

     

    The selection of high-quality gas stoves should be considered from the following three aspects

     

    a. Selection of the quality of the body: The appearance of the gas stove should be beautiful and elegant, and there should be no collision everywhere on the body. The surface painting of some products made of cast iron, steel plate and other materials should be uniform and smooth, without blistering or falling off. The overall structure of the gas stove should be stable and reliable, the stove surface should be smooth and flat, without obvious warpage, and the installation of the parts should be firm and there should be no looseness.

     

    b. Combustion quality inspection: The installation position of the switch knob, nozzle and ignition device of the gas stove must be accurate. When igniting through ventilation, the gas should basically be ignited every time it is ignited (at least 8 times of 10 starts should be able to ignite the flame. ), the flame should burn through all the fire holes within 4 seconds after ignition. When the electronic igniter is used to ignite, the human body will not feel electric shock when it touches the metal parts of the stove. When the flame burns, it should be uniform and stable in blue and blue, and there is no yellow fire or red fire phenomenon.

     

    c. Inspection of other aspects: When conducting the ignition test, it is also necessary to check whether the damper of the gas stove is easy to adjust and whether the installation of the pot bracket is appropriate.

     

    Installation of gas stove

     

    1. The cooker is required to be installed in a well-ventilated kitchen. The minimum distance from the steel cylinder is 1 meter, but the longest air intake hose should not exceed 2 meters. Do not stack flammable objects under and around the cooker.

     

    2. The clear distance between the back of the cooker and the wall is not less than 15 cm, and the clear distance between the side and the wall is not less than 20 cm; if the wall is made of flammable materials, a thermal insulation and fireproof layer must be attached, and the fireproof layer should extend beyond the two ends of the stove surface. The part below the stove and the stove should be no less than 10 cm, and the part above the stove should not be less than 80 cm.

     

    3. The gap at the connection of the intake pipe must be sealed. When connecting with a hose, the hose must be in place and clamped with a clamp.

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

     

    wdh-site View More
  • Precautions when buying a range hood

    Precautions when buying a range hood

    Precautions when buying a range hood

     

    There are three types of range hoods on the market: thin type, deep type and cabinet type. When purchasing, you should first determine the type to be purchased according to the specific layout of your kitchen and personal preferences.

     

    Thin range hood

     

    The thin cooker hood is light in weight, small in size and easy to hang, but its thin design and low motor power make a considerable part of cooking fumes not included in the suction range and have the opportunity to escape indoors, and its smoke exhaust rate is significantly lower than The other two types of models. Therefore, most consumers do not consider this type when purchasing a range hood.

     

    If your kitchen wall is thin (non-load-bearing wall), it cannot support the weight of the deep range hood, and due to the limitation of the kitchen layout, it is impossible to install the cabinet range hood, then the thin range hood is your ideal choice. .

     

    Deep range hood

     

    The deep-type range hood has a smooth and beautiful appearance, high smoke exhaust rate, and can be matched with different styles of modern kitchen furniture. It has become the first choice for consumers when purchasing range hoods, and occupies a dominant position in the market. Various manufacturers have launched different models of deep range hoods.

     

    The deep cover of the deep range hood can draw cooking fumes in a wider range, and its deep body is easy to install a powerful motor, which greatly improves the smoking rate of the range hood.

     

    Because the deep range hood is large and heavy, the kitchen wall is required to have a certain thickness when hanging, which can withstand the weight of the range hood itself and the pressure it generates during operation. Take this into consideration when purchasing.

     

    Cabinet range hood

     

    The cabinet type range hood is composed of a fume extraction cabinet and a special range hood. The fume hood is tapered. When the fan is turned on, a negative pressure area is formed in the cabinet, and the external air is supplemented to the inside. The opening in front of the fume extraction cabinet forms an air inlet. , oil fume and other exhaust gas cannot escape, ensuring the extraction rate of oil fume and nitrogen oxides.

     

    Cabinet type range hoods have a high smoking rate and do not need to be hung. There is no drilling and installation problems, and there is no need to consider the bearing capacity of the kitchen wall. It should be said that at this point, the advantages of thin and deep range hoods are integrated. However, due to the limitation of the left and right baffles of the fume extractor, the operator is somewhat limited and inconvenient when cooking. Therefore, many consumers give up this option. In addition, its appearance is not delicate enough, and it is not easy to match with modern and fashionable kitchen furniture.

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

     

    wdh-site View More
  • Correct use of range hoods

    Correct use of range hoods

    Correct use of range hoods

     

    You should know about range hoods. Range hood, also known as range hood, is a commonly used kitchen electrical product. Its main function is to purify kitchen fumes, so that the kitchen can be kept clean to a certain extent. The range hood is generally installed directly above the kitchen stove, so that the oil fume absorption rate will be better. How much do you know about the use of range hoods? It is very important to learn to operate the range hood correctly, because this can improve the efficiency of our use of the range hood, so as to maximize its function. How to use the range hood? How many people know how to use it correctly? Let's take a look at it today.

    Installation steps of the range hood

     

    1. Determine the installation position of the range hood

     

    The distance between the bottom of the range hood and the stove should be close enough, between 35-45cm; according to the size of the specific range hood product, find the installation position of the pinch plate on the back, and draw the line with a pencil.

     

    2. Drill holes to install the hanging plate

     

    After determining the installation position of the hanging plate, use an impact drill to drill a hole with a depth of 5-6 cm at the installation position, press the expansion pipe into the hole, and then use the screw to securely fix the hanging plate.

     

    3. Hook the range hood to the hanging plate

     

    The style on the back of the range hood can be embedded with the hanging plate, so as to hang the range hood.

     

    4. Install the exhaust pipe

     

    Insert one end of the exhaust pipe into the notch between the inner and outer rings of the air outlet of the check valve, and fasten it with screws. The other end directly extends into the outdoor through the reserved hole. If the exhaust pipe is connected to the public flue, it must be connected with the anti-smoke check valve of the public flue and sealed well. If the smoke is exhausted outside the wall, it is recommended to install shutters outside the exhaust pipe to avoid refilling.

     

    5. Install the extension cover

     

    This is only for products that need to install an extension cover. As mentioned earlier, if you need to install the extension cover, you must first install the hanging plate. Then, after installing the range hood and exhaust pipe, fasten the extension cover.

     

    6. Install oil cups and other accessories

     

    Next, only the oil cups, masks and other accessories for installing the range hood are left. After the accessories are installed, the range hood is basically installed.

     

    Don't turn off the cooker hood immediately after cooking

     

    Many people are used to turning off the lampblack switch after cooking, which is actually wrong, because there will actually be some lampblack residue after cooking.

     

    If we turn off the lampblack machine immediately after cooking, then the lampblack may stay in the kitchen, which is quite harmful to our body.

     

    Therefore, after cooking the vegetables, it is best to let the range hood run for another three to five minutes to ensure that the range hood in the room is completely removed before turning off the range hood.

     

    Range hoods should be cleaned regularly

     

    In fact, there are not only grease stains in the oil cup, but other parts of the range hood are also full of grease. These grease stains will affect the operation of the parts, resulting in poor smoke extraction effect of the range hood.

     

    If the smoke exhaust effect of the range hood is not good, the fumes will stay in the room and endanger our health, so the range hood at home must be cleaned regularly.

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • Gas stove repair and maintenance skills

    Gas stove repair and maintenance skills

    Gas stove repair and maintenance skills

     

    For the life of an item, daily cleaning and maintenance is very important, and this is the case with the gas stove in the kitchen. If there is not enough maintenance awareness, there will be many failures caused by improper operation. Today we have collected some information to talk about some very practical knowledge of gas stove maintenance. In addition, there are many maintenance tips for gas stoves, I hope to help everyone.

    The working principle of flameout protection

     

    The working principle of the flameout protection of the gas stove is: the thermocouple receives the heat and transmits the heat to the magnetic valve through the wire, and the heat energy received by the magnetic valve is converted into a small amount of electric energy to absorb the valve of the magnetic valve, so that the gas is transmitted to the stove through the magnetic valve, Because he had no heat when the ignition was first started, the design was to use a switch to force the magnetic valve to open through a small mechanism when the ignition was started.

     

    Reasons and solutions for the automatic flameout of the gas stove

     

    1. The battery is dead or the contact is bad

     

    You can unbutton the battery and reinstall it again to ensure that all contact surfaces of the battery are clean, and then fire again to see the situation. If it still shuts down, you can replace the battery and try again.

     

    2. Thermal probe problem

     

    Look at the burner on the bad side, and see if the flame in the middle can burn the probe, and the fire must be burnt to the probe. When there is still a little bit, you can press and hold for ten seconds, and when you release the switch, the probe is a heat sensor, and it needs to be hot to stop the fire.

     

    3. The temperature of the thermocouple is not enough

     

    After the fire is on, don't let go through the small mechanism on the switch to hold the valve of the magnetic valve, and let go when the thermocouple reaches a certain temperature, usually more than 30 seconds to one minute.

     

    4. The electric thermocouple cannot eat the flame

     

    It may be that the electric thermocouple cannot eat the flame. It is necessary to adjust the damper under the gas stove to make the fire a little bigger, so that the electric thermocouple can eat the flame and receive heat and then transmit the heat. Break, pay attention to even force not to break the thermocouple, and also pay attention to cleaning the thermocouple so that it can better transmit heat.

     

    5. The feedback loop of the gas stove is not smooth

     

    To ensure the continuous combustion, it is necessary to ensure that the feedback circuit is unobstructed. The feedback parts of the gas stove are mostly set in the place where the flame can burn directly. When the flame is normal, the feedback loop will provide the pulser with a signal of continuous gas supply. Otherwise, the pulser will Close the solenoid valve.

     

    Gas stove maintenance skills

     

    1. Regular cleaning of gas stoves

     

    The oil stains produced by the gas stove after a period of use not only affects the hygiene but also easily causes the gas stove to be blocked. Therefore, the gas stove needs to be cleaned regularly.

     

    2. Cooker maintenance and inspection

     

    Find a professional to repair and regularly check the air tightness of the stove and the gas supply system with a foaming agent.

     

    3. Clean the stove

     

    Cleaning of cooktop tiles. Use discarded candle heads, the surface of the candle is smooth, even if there is oil stains on it, just wipe it with ordinary detergent and water, and gently apply the seam of each tile, first along the seam Paint in the direction, and then paint it horizontally after it is full, making sure that the thickness of the candle is the same as the thickness of the tile.

     

    Deep cleaning method for stovetop

     

    (1) Mix two tablespoons of white vinegar with 200 ml of warm water, and then use a sponge and an environmentally friendly loofah to dip this "hot vinegar water" to clean the stainless steel stove to make it as bright as new.

     

    (2) Mix 500ml of hot water with 30g of baking soda (sodium bicarbonate), you can also dip it with loofah to easily remove the oil stain on the stove.

     

    (3) Press 50 grams of baking soda directly into a fine powder, sprinkle it on the stove, and then wipe it with a cloth. You can also use coarse salt grains to clean, use a rag to dip the coarse salt for pickles, you can easily "rub" the oil stains on the stainless steel stove and glass stove, remember to wipe the salt clean, otherwise the stainless steel stove The table will turn black.

     

    (4) Directly use the inner surface of the potato skin to wipe the place on the stove that is stained with oil and the discoloration of the vegetable soup, and then wash it with hot water again, you will see a particularly bright stove. In addition, use the head and tail of radish and chopped cucumber dipped in a little detergent to scrub the oily area of ??the stove, and then scrub twice with a rag dipped in water, the effect is also very good.

     

    Clean the fire rack and air outlet

     

    Cleaning of gas stoves and vents. Fill a pot of water first, put all the fire racks on the stove in to cook, and when the water is hot, the sticky dirt will decompose and peel off. To prevent the vent hole of the stove from being blocked, the stove head should be removed every week and the vent hole should be cleaned with a toothpick once a week. Carbide and coke debris accumulated on the stove can be removed with a small fine brush, or the fire outlet can be pierced with a thin iron wire.

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • Often cooking at home, how to choose a range hood

    Often cooking at home, how to choose a range hood

    Often cooking at home, how to choose a range hood

     

    If you often cook and cook at home, then a range hood is an indispensable kitchen appliance. Whether the cooker hood is easy to use or not is directly related to the chef's happiness in the kitchen and the deliciousness of the dishes. After all, no one wants to cook food in an environment full of soot, and the food made in a hurry is naturally not good.

     

    If the oil fume diffuses into other rooms, it will make people feel depressed. Excessive inhalation of oil fume will also affect the health of the body. How to choose a good range hood? You can't just look at the brand and price, but also the three most important aspects of a range hood. As long as these performances are excellent, the purchased range hood will basically not be "pitted".

    1. Appropriate air volume is the basis of a good range hood

     

    The air volume refers to the exhaust speed of the range hood. For a range hood, the air volume is the most basic indicator. The larger the air volume, the better the exhaust effect, but the greater the corresponding noise.

     

    When many people choose a household range hood, they blindly choose a range hood with a large air volume, and often buy products with an exhaust air volume of up to 30m/min. However, many of these products are used in the back kitchen of small hotels, and the noise and power consumption are very large. If you choose a range hood of 17-22m/min for home use, you can meet most people's requirements for smoke exhaust speed.

     

    2. Wind pressure strength and air duct design that cannot be underestimated

     

    If the range hood has the air volume, it must have a reasonable air pressure and air duct design, otherwise it can only suck in the smoke but not discharge it cleanly, or because the air duct design is unreasonable and the efficiency is low.

     

    Generally speaking, under the same performance, the higher the wind pressure, the better. For high-floor households, it is recommended to choose a range hood with a wind pressure of not less than 300Pa. For low-floor households that are relatively close to the flue, choose a range hood with wind pressure. It should also not be lower than 240Pa.

     

    In addition, the rationality of the air duct design also directly affects the exhaust efficiency. The resistance of the air duct of the traditional side-suction range hood is relatively large, but there are also some very good designs. For example, many types of range hoods creatively tilt the fan to 30° The stove, the air inlet, the volute outlet, and the air outlet are aligned at four points and one line, and the straight line smoking is naturally unimpeded. With the static wind pressure of up to 460pa, there is no pressure even if there is a lot of smoke.

     

    3. Noise is pollution that cannot be ignored

     

    The range hood itself eliminates oil fume pollution, but it will generate new noise pollution. The impact of noise on human health is no less than that of oil fume. Long-term noise will make people upset, even nauseated and dizzy. The noise generated by the range hood is naturally smaller. The better, if you want to talk to your family while cooking, the noise generated by the range hood should be at least lower than 60 decibels, and a range hood higher than 70 decibels is basically equivalent to shouting in a downtown area.

     

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • Range hood cleaning method

    Range hood cleaning method

    Range hood cleaning method:

     

    1. Surface cleaning of range hood:

     

    Use a scouring pad to apply the aqueous solution to the surface of the object first clean the less greasy utensils, cabinets, wall tiles and other surfaces in the kitchen; finally, near the stove and the range hood.

     

    2. Cleaning of the fan blades of the range hood:

     

    Spray the special cleaner on the fan blade and let it stand for 3 minutes; boil a pot of water until it boils, and make the water vapor aim at the range hood, then turn on the range hood, and use the principle of centrifugal force to make the oil remaining on the fan blade flow into the oil collecting cup; turn off the switch, wipe with a clean rag, and the fan blades will be clean immediately

     

    3. Range hood filter cleaning

     

    Remove the fan blade, soak it in warm water with special detergent, and let it stand for about 10 minutes;

     

    Wipe with a rag to gently wipe off the oil; if there is still stubborn tar sticking, you can use a toothbrush dipped in a strong oil-stain cleaner and then gently brush, and rinse with water.

     

    4. Cleaning the oil storage box of the range hood

     

    If it is found that the oil collection cup is 6 points full, start cleaning and dump the accumulated waste oil; soak the oil collection cup in warm water and detergent for 3 minutes, and then wipe it off easily with a rag; Add a new disposable oil box with a smaller size to the oil storage box, and discard the disposable oil box next time, it will be more convenient to clean up.

     

    5. Wipe off the rest with an aqueous scouring pad.

     

    The places under the ignition switch of the stove and the small gap between the switch keys of the range hood and other places where the fingers cannot reach, can be wiped with a bamboo pad and a scouring pad.

     

    6, and then wipe with clean water towel.

    Tips for cleaning the range hood:

     

    Coup 1: Fight poison with poison, use waste oil to remove grease stains

     

    The range hood covered with oil stains can borrow waste oil to use oil to attack oil. First of all, you can wipe the body of the range hood with a rag dipped in waste oil, so that the body is covered with waste oil. Then, use a rag dipped in detergent to wipe the fuselage again, so that the fuselage is covered by the detergent and its foam. Finally, rinse several times with clean water.

     

    Coup 2: Mixing detergent and vinegar, the effect is particularly good

     

    When cleaning the range hood with the mixture, first remove the impeller and soak it in the mixture. Rinse with clean water after 10-15 minutes. At the same time, other parts of the range hood can also use the mixture to remove stains.

     

    Coup 3: Heating cleaning method, easy to clean under high temperature

     

    The oil stains of the range hood are generally solid oil, which is more troublesome to clean. Since solid oil will bring difficulties to cleaning, turning solid oil into liquid oil makes this difficulty naturally solved. The condition of solid oil to liquid oil is heating, you can use the residual temperature of the induction cooker or the temperature of the hair dryer, and then when the solid oil softens, wipe it with a rag dipped in detergent, and finally wash it with warm water.

     

    Coup 4: The magical use of small paper towels

     

    In addition to being used for various daily hygiene, paper towels are also a way to clean range hoods. First, you can spread the paper towel on the range hood, and then wet the paper towel with the washing powder mixture. Wet paper towels should be changed frequently, about every five minutes for best results. Finally, use a damp cloth to wipe the oil stains and washing powder solution on the fuselage, and it can be done after several operations. Why is this cleaning method inconvenient? First, it is laborious and laborious to change paper towels frequently. Second, the cleaning is not comprehensive, and some parts are not good with stickers

     

    With these tips for cleaning the range hood, you will no longer be afraid of kitchen cleaning in the future, especially the cleaning of the range hood. I hope these can help those mothers who work hard in the kitchen.

     

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • Things to look out for when buying a Range Hood

    Things to look out for when buying a Range Hood

    About Range Hood :

     

    Things to look out for when buying a Range Hood

     

    There are a few things you should keep in mind when purchasing a range hood. The first is the size of the hood. Make sure to measure the width of your stove or cooktop and compare it to the width of the range hood. You'll also want to make sure that the range hood is deep enough to cover the entire cooktop.

     

    Another thing to consider is the CFM, or cubic feet per minute. This measures the amount of air that the range hood can move in a minute. The higher the CFM, the better. You'll also want to make sure that the range hood has a good warranty. This will protect you in case anything goes wrong with the product.

    Range Hood

    Dimensions of Range Hood

     

    Range hoods are one of the most important kitchen appliances. They are installed above the cooktop or stove and help to remove smoke, grease, and odors from the air. They come in a variety of shapes and sizes, so it is important to choose one that will fit your needs.

     

    The size of a range hood is measured by its width and depth. The width is the distance from one side of the hood to the other, while the depth is the distance from the front of the hood to the back. The size of your range hood will be determined by the size of your cooktop or stove. It is important to choose a range hood that is at least as wide as your cooktop or stove.

     

    When it comes to depth, there are two options: shallow and deep. Shallow range hoods are typically between 10 and 18 inches deep, while deep range hoods are usually between 20 and 24 inches deep. Deep range hoods are better

     

     

    The suction power of the Range Hood

     

    A range hood is a mechanical ventilation device that hung above the stove in the kitchen. The range hood will help to remove smoke, steam, heat, and odors from the air. The suction power of the range hood is important to consider because it will determine how effective the range hood is at removing these elements from the air. The suction power is measured in CFM (cubic feet per minute). A range hood with a higher CFM rating will have a higher suction power and will be more effective at removing these elements from the air.

     

    How to Install Range Hood

     

    A range hood is an important component of a kitchen ventilation system. It helps to remove smoke, odors, and excess heat from the air. Many range hoods are also equipped with filters to help remove airborne contaminants from the kitchen.

     

    Installing a range hood is a relatively simple process, but it is important to follow all manufacturer instructions and local building codes. In most cases, range hoods can be installed using only basic hand tools.

     

    1. Begin by reading all manufacturer instructions and local building codes before beginning installation.

     

    2. Most range hoods will need to be mounted to either the wall or ceiling. Use the appropriate fasteners for the material you are mounting the range hood to.

     

    3. Once the range hood is mounted in place, connect the ductwork to the exhaust port on the back of the unit. Make sure all connections are secure and sealed properly.

     

    4. Turn on the power to the unit and test it out by

     

    How to Maintain the Range Hood

     

    Assuming that your range hood is made of stainless steel, the best way to keep it clean is to use a mixture of water and vinegar. Simply mix equal parts water and vinegar in a bowl and use a soft cloth to wipe down the range hood. If there are any tough spots, you can use a toothbrush to scrub them away. Once you're finished, dry the range hood with a clean towel.

     

     

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • what is the best range hood

    What is the best range hood

    What is the best range hood

     

    for a kitchen?

    What to pay attention to when installing Range Hood

    There are many factors to consider when purchasing a range hood for your kitchen. 

    The first is the size of the hood. It should be at least as wide as your stove or cooktop. 

    The second is the style of the hood. 

    The third is the type of ventilation. The most common types are ducted and ductless. Ducted range hoods vent to the outside and are more effective at removing smoke and odors from the kitchen. Ductless range hoods recirculate the air and are less expensive to operate but they are not as effective at removing smoke and odors.

    The most popular styles are under-cabinet and wall-mounted. Under-cabinet hoods are less expensive and easier to install but wall-mounted hoods provide better ventilation.

     

    Features of Range Hood

     

    A range hood is a type of ventilation hood that is installed above a stove or cooktop in order to remove smoke fumes and heat from the kitchen. Range hoods come in a variety of shapes sizes and styles to suit the needs of different kitchens. They can be vented to the outside or non-vented and some models even come with built-in lighting for added convenience.

     

    Most range hoods are made from stainless steel or another type of metal as these materials are best at resisting heat and corrosion. Some range hoods also have glass panels or other decorative features that make them more visually appealing. When shopping for a range hood it is important to consider the size of the stove or cooktop it will be used with as well as the ventilation system in the kitchen.

     

    Types of Range Hoods

     

    There are four common types of range hoods:

     

    1. Under-cabinet range hoods are the most popular type of hood and are installed directly under your kitchen cabinets. They’re available in a variety of styles and sizes to fit any kitchen.

     

    2 Island range hoods are installed in the middle of your kitchen over an island cooktop. They come in a variety of styles including traditional contemporary and industrial.

     

    3 Wall-mounted range hoods are installed on the wall above your stove or cooktop. They’re available in a variety of styles including traditional contemporary and industrial.

     

    4 Ventless range hoods don’t require ducting and can be installed almost anywhere in your kitchen. They come in a variety of styles including traditional contemporary and industrial.

     

    Installation of Range Hood

     

    Installing a range hood is not a difficult task but there are a few things you need to keep in mind. First make sure you have the proper tools and materials. Second make sure the area where you will be working is well ventilated. Third follow the instructions carefully.

     

    The most important thing to remember when installing a range hood is to make sure the area is well ventilated. This is because range hoods can release fumes and other potentially harmful chemicals into the air. If you are working in an area that is not well ventilated you may want to consider wearing a respirator or other type of protective gear.

     

    Another thing to keep in mind when installing a range hood is to make sure the unit is level. This is important because if the unit is not level it could cause problems with the ventilation system. To level the unit you will need to use a level and a tape measure.

     

    Maintenance of the Range Hood

     

    Assuming you have a ducted range hood the main thing you need to do is to clean the filters regularly. This will ensure that your range hood can continue to function properly and efficiently. You should also check the ductwork regularly to make sure that it is not obstructed in any way. If it is then this can cause your range hood to work less effectively.

     

    There are many factors to consider when purchasing a range hood for your kitchen. The size of the hood is important as is the style and the features. You also need to decide if you want a ducted or ductless range hood. Once you’ve considered all of these factors you can narrow down your choices and find the best range hood for your kitchen.

    Where to buy Range Hood

     

    Guangdong Cookermore Co.,ltd. was founded in 2020, is an electrical manufacturing factory integrating the research, manufacture and marketing. We mainly manufacture the Gas stove, gas water heater, Range hood, Induction cooker, Infrared cooker (ceramic cooker), and so on. Cookermore has rich experiences of ODM/OEM with electric invent and advanced equipment, and propose the leading global heating control technology of digitized electromagnetic induction. 

     

    We devote ourselves to provide high quality products with competitive price to gain win-win situation. Please keep in touch with us. You are welcome to visit our company.

     

    For more product information links about Range Hood, you can click on the link below.

    1.C03-P1 Curved glass

    2.S02-E1 Island hood

    3.C03-P1 Slant

    4.F05-P1 Slim hood

     

    wdh-site View More
  • wdh-site
  • wdh-site
  • wdh-site

Contact

wdh-site
Thank You!

Your information has been sent to us, we will reply you shortly

OK
wdh-site
Bad!

No success, please try again!

Try Again